Measure a Wingback Chair and Ottoman
Wingback Chair And Ottoman – to measure a wingback chair and ottoman for recovery material is wear Full-back chair from the room, take a dry place and out of breath, as f. Ex a garage or workshop. 2nd Remove the old structure from the chair one section at a time. You will need pliers to pull out the heavy staples or pins and box cutters or a seam ripper for the other areas. Start at the bottom of the chair and work your way up to the arm sections. Be careful not to rip the old structure as it will be your pattern.
3rd to measure a wingback chair and ottoman for recovery material is number each piece of fabric with a permanent marker, because you will have to replace it in the same way, or you can feel it by writing on it ” top right back in the “cushion” and repeat with the appropriate names for each piece. 4th Place the fabric on a workbench or a clean sheet on the floor. 5th Measure each section, writes down the length and breadth of the sections and brands each section on a line of notebook paper.
6th Choose the fabric you will use to restore your wingback chair and ottoman. Most fabrics come in 54 or 60 inches long. 7th Place sections closely on the table or clean sheet for the correct measurements and not wasting money on too much excess material. 8th measure all the sections and determine how many yards of fabric chair will need. Allow plenty of food in the event that you accidentally cut a piece or spill something on a portion of the material.